| Chip
Components |
| Green
Products are Lead-Free, Cadmium-Free |
Order
Trial Quantity |
| Product |
Purpose |
PDF |
 |
| 9912-G |
Silver
Conductor
Excellent solderability and leach resistance,
for use on alumina or beryllia |
 |
 |
| 9501-C |
Silver-Platinum
Conductor
Excellent solderability, for use with R-300-P Series potentiometer
applications |
|
|
| 9512-G |
Silver-Platinum
Conductor
Excellent printability, for general use |
|
|
| 9516 |
Silver-Platinum
Conductor
Electrode for use with capacitor dielectrics |
|
|
| 9693-G |
Silver-Palladium
Conductor
Low cost, general purpose |
|
|
| 9693-S-A |
Silver-Palladium
Conductor
For high-speed printing, excellent adhesion and solderability |
|
|
| 9695 |
Silver-Palladium
Conductor
20/1, wide firing range 625 - 930 °C |
|
|
4100 Series
|
Capacitor
Dielectric Series
For capacitors, dielectric constant = 100 - 300 |
|
4150 Series |
Capacitor
Dielectric Series
For capacitors, dielectric constant = 300 - 2,400 |
|
4200-C Series |
Capacitor
Dielectric Series
For capacitors, dielectric constant = 2,000 - 10,000 |
|
R-300-A/B series |
Resistor
Series
For resistors, two series, blendable in the resistivity
ranges 1 - 10 kohm/sq. and 10 k - 1 Mohm/sq. |
|
R-300-P Series |
Resistor
Series
For potentiometers, TCR = 50 ppm/°C in mid-range,
CRV < -0.3% |
| G-481 |
Overglaze
Acid resistant, excellent silver migration protection,
green, 600 °C |
|
|
| G-482 |
Overglaze
Black version of G-481 |
|
|
| G-485-1 |
Overglaze
Acid resistant, fires at 600 °C |
|
|
| G-486-1 |
Overglaze
Black version of G-485-1 |
|
|
|
The
above materials are selected from the full ESL range
of pastes and are representative of the most common
market requirements. See the ESL Product
pages for additional materials.
|
