| Sensors |
| Green
Products are Lead-Free, Cadmium-Free |
Order
Trial Quantity |
| Product |
Purpose |
PDF |
 |
5051
|
Platinum
Conductor Metallo-organic for rtd (resistive temperature
detector) applications, 0.2 µm fired thickness/layer
|
 |
 |
| 5542 |
Platinum
Conductor Porous electrode material for use on partially
stabilized zirconia, for example, for oxygen sensors |
 |
 |
| 5544 |
Platinum
Conductor
For use on resistance thermometers and heaters, TCR>3,300 ppm/°C |
 |
 |
| 5559-B |
Platinum
Conductor Co-firable conductor, with higher resistivity than 5571, for use as a heater in multi-layer ceramic structures such as planar oxygen sensors |
 |
 |
| 5570 |
Platinum
Conductor Co-firable conductor for use as an electrode in multi-layer ceramic structures such as planar oxygen sensors |
 |
 |
| 5571 |
Platinum
Conductor Co-firable conductor for use as a heater in multi-layer ceramic structures such as planar oxygen sensors |
 |
 |
| 5572 |
Platinum
Conductor For use as the inner electrode on conical zirconia oxygen sensors |
 |
 |
| 5573 |
Platinum
Conductor For use as the outer electrode on conical zirconia oxygen sensors, can be pad printed |
 |
 |
| 5574 |
Platinum
Conductor Co-firable conductor for use as lead or contact pads in multi-layer ceramic structures such as planar oxygen sensors |
 |
 |
| 5575 |
Platinum
Conductor Co-firable conductor for use as a via-fill in multi-layer ceramic structures such as planar oxygen sensors |
 |
 |
| 6642 |
Palladium
Conductor Fritless Pd paste, available in screen-printable or pourable versions, for use on conical zirconia oxygen sensors |
 |
 |
| 5545 |
Platinum
Conductor
Excellent conductivity, for use on heating elements, etc. |
 |
 |
| 5545-LS |
Platinum
Conductor
Thinner printing version of 5545 |
 |
 |
| 8081-A |
Gold
Conductor
Metallo-organic, <1 µm fired thickness on alumina |
 |
 |
| 8837-G |
Gold Conductor Very thin printing, for use in terminating resistors on strain sensors |
 |
 |
| 4440 |
Multilayer Dielectric Screen-printable fugitive paste to form channels in multi-layer ceramic structures such as planar oxygen sensors |
 |
 |
| 4492 |
Multilayer Dielectric Screen-printable alumina paste for use in forming insulating layers in multi-layer ceramic structures such as planar oxygen sensors |
 |
 |
| 4550 |
Multilayer Dielectric Screen-printable zirconia paste for use as a porous overcoat to protect the Pt electrode in multi-layer ceramic structures such as planar oxygen sensors |
 |
 |
3414 Series |
Resistor
Series
For pressure sensors, strain gauges, etc., gauge factor
= 14 - 19 |
 |
 |
NTC-2100 Series |
Resistor
Series
For NTC thermistors, beta = 300 - 3,100 depending on resistivity |
 |
 |
PTC-2600 Series |
Resistor
Series
For PTC thermistors, TCR »
4,000 ppm/°C for resistivity = 10 ohm/sq. |
 |
 |
PTC-2600-I Series |
Resistor
Series
For PTC thermistors, TCR> 4,000 ppm/°C for <
10 ohm/sq. with higher viscosity than the PTC-2600 Series |
 |
 |
 |
| A range of ESL ElectroScience ceramic tapes for use in planar oxygen sensors and other multi-layer components is available. For details, please see the ESL web pages Ceramic Tapes and
Tape Systems. For further information, please contact ESL Technical Service personnel. |
The
above materials are selected from the full ESL range
of pastes and are representative of the most common
market requirements. See the ESL Product
pages for additional materials.
|