HomeContactProduct SpotlightProductsApplicationsTechnical PublicationsView BasketCheck Out

Ceramic Tapes
(See Ceramic Tape Systems)

Silver Conductor Pastes
Silver/Platinum
Conductor Pastes

Silver/Palladium Conductor Pastes
Silver/Palladium/Platinum Conductor Pastes
Platinum Conductor Pastes
Platinum/Gold
Conductor Pastes

Gold Conductor Pastes
Specialty Conductor Pastes
Polymer Pastes
Crossover/Multilayer
Dielectrics & Dielectric
Coatings


Capacitor Dielectric Pastes
Resistor Pastes
Overglaze & Sealing Dielectric Pastes

Vehicles & Thinners

Porous Cover Plates

Solder Pastes
(from ESL Europe Only)

Specialty Conductor Pastes
Green Products are Lead-Free, Cadmium-Free Order Trial Quantity
Product Purpose PDF
2170-B Tungsten conductor for use on refractory green tape as a via fill, fires 1,500°C to 1,650°C in either wet ammonia or hydrogen
2323 Silver-copper eutectic brazing paste, fluxless and fritless, for use in fuel cells, etc.
2323-HV Silver-copper eutectic brazing paste, fluxless and fritless, high viscosity
2593-P Fritless aluminum for back surface of silicon solar cells
4343 Gadolinium doped ceria paste (GDC), for use in fuel cells
4345 Scandia stabilized zirconium oxide paste (6ScSZ), for use in fuel cells
4410 Nickel oxide anode paste, for use in fuel cells
4411 Nickel oxide anode paste with added pore-former, for use in fuel cells
4412 Nickel oxide (50wt%) and zirconia (50wt%) anode paste, for use in fuel cells
4416 Nickel oxide (65wt%) and zirconia (35wt%) anode paste, for use in fuel cells
4420 Lanthanum strontium manganite paste (LSM), for use in fuel cells
4421 Lanthanum strontium cobalt ferrite paste (LSCF), for use in fuel cells
4422 Lanthanum strontium manganite/zirconia paste, for use in fuel cells
4440 Porosity-forming fugitive paste, for use in fuel cells
4480 Doped lanthanum chromite paste (LCC), for use in fuel cells
4481 Yttria stabilized zirconia paste (8YSZ), for use in fuel cells
4482 Lanthanum strontium cobalt chromite paste (LSCC), for use in fuel cells
6642 Palladium paste, fritless, for use on conical zirconia oxygen sensors, available in screen-printable or pourable versions
2312-A-3
Thick-printing copper for power circuits
2554-N-1 Nickel for gas discharge display cathode
2591-E Fritted aluminum for back surface of silicon solar cells

The above pastes are selected from the full ESL range and are representative of the most common market requirements. If you are seeking properties or characteristics not shown above, please contact ESL.

ESL ElectroScience • 416 East Church Rd. • King of Prussia, PA • 19406-2625 • USA • Tel: 610-272-8000 • Fax: 610-272-6759
Copyright © 2004-2008 ESL ElectroScience. All rights reserved.